Grupo Pacadar

Components that are connected to shafts to provide the surface needed to place the supports for the deck beams.

Components with solid or lightweight cross-sections (trapezoidal or pi-shaped lintels).

Single-piece lintels on one or more piers.

Partial lintels to be connected on-site, which allow for greater dimensions by reducing the weight of each piece.

Pi-shaped lintels for support on two U-beams or several double-T beams on decks of up to 12.0 m wide and with spans of less than 45 m.

Trapezoidal lintels on decks with precast beams of any width.

• Trapezoidal lintels are linear components that rest on several piers. And pi-shaped lintels are arranged on a single solid or hollow rectangular shaft.
• Prefabricated lintels can also be connected to shafts built on-site.
• Varying cross-section size and length to adapt to the dimensions required by the type of support for the beams or the width of the deck.
• Simple and effective connection to the shafts.

• Usage with decks of precast beams (double-T, U beams and box girders).
• Large building projects.

The lintel is connected to the pier with projecting reinforcement and sheathing.

• Lintels quickly assembled on-site.
• Simplification of formwork (moulds).
• Connection to the shafts simple to perform.
• Minimum disruption to site surroundings.
• The perfect solution for inaccessible locations.

Data sheet of Lintels.

All data sheets of Civil Engineering.